What Is A Folding Door?

Folding door, a furniture term, is mainly applicable to the partition use of workshops, shopping malls, office buildings, exhibition halls, home decoration and other places. It is used for screens. Both inner and outer doors can be installed and used. It can effectively play the role of temperature insulation, dust prevention, noise reduction, sound insulation, shielding, etc.

Introduction to folding door

Folding door refers to the door whose leaf can be folded during opening. It can also be divided into two basic types: flat open folding door and push-pull folding door. Because the folding door can be folded when it is opened, it takes up a small space, and can often be used as an effective method for re separation and combination of indoor space - living partition, while the flat opening folding door is mostly used for toilets or lavatories with a small area.

Folding door structure

Folding door is mainly composed of door frame, door leaf, transmission parts, rotating arm parts, transmission rod, orientation device, etc. The door type can be installed indoors and outdoors. Each door has four leaves, two side leaves and two middle leaves. The frame on one side of the side door leaf is connected with the middle door leaf by a hinge. The upper and lower ends of the stiles on the other side of the side door leaf are respectively equipped with upper and lower rotating shafts. The rotating shafts are connected with the upper and lower rotating shaft seats of the door frames on both sides of the door opening. The side door stiles will rotate around the side stiles and drive the middle door leaf to rotate to 90 °, so that the door leaf can be opened and closed. When powered, the upper rotating shaft end is installed with rotating arm parts and transmission parts, and the upper middle of the door frame is installed with transmission parts and door opener; The middle door leaf is provided with a directional device. After the door opener operates, it drives the two gears of each transmission part to rotate, and the two racks engaged with it make a linear motion. The other end of the rack is connected with the rotating arm, which makes a circular motion. The side door frame rotates around the side stile, and the door leaf is opened electrically. Safety protection devices are installed at the middle dense joints of the two middle door leaves, which will return to the fully open state when there is an obstacle when closing, safe and reliable.
 

Advantages of folding doors

The folding door has the features of elegant appearance, novel style and various colors Easy to use, easy to push and pull, and effectively save the occupied space of the door. Folding doors have light weight, thermal insulation, moisture-proof, fire-retardant, noise and sound insulation, acid and alkali resistance, corrosion resistance and other chemical stability. It is not stained with oil smoke, easy to clean and not easy to change color. It is also suitable for kitchen, bathroom, bathroom and other occasions Simple and fast installation, long service life and convenient maintenance. It has been widely used in offices, workshops, and super large places for heat preservation, insect prevention, dust prevention, shielding and isolation.
 

Maintenance method of folding door

If there is dirt on the surface of the folding door, please use neutral detergent, wipe the dirt with a towel, and then wipe it with wet wool (dry). Please do not use organic solvents to prevent the folding door surface from fading. Folding door series is easier to clean and take care of. Not easy to dirty, and common dirt can be easily removed with water.