How to maintain and repair sliding glass doors?

How to maintain and repair sliding glass doors?

When using the mobile glass door, I remind you that the mobile glass door will become more and more difficult to use if it is used for too long. You should learn to maintain the mobile glass door at ordinary times.
With the accumulation of time and the careless use, it will be difficult to slide the movable glass door, and it will be very difficult to pull it open. At this time, it is necessary to repair the sliding door. However, it is also very troublesome to find a decorator. Here are some tips to quickly repair the sliding door.

First of all, it is necessary to analyze the sliding glass door. Its components are a fixed sliding track and a movable glass door. Only when the door slides more smoothly can it be more comfortable in use. Generally, the glass door is very heavy, so the track needs to be better maintained. It can be said that the track is the key. At ordinary times, we must take care of the track, and no sundries can be put into the track. If we find any sundries on the track, we must clean them in time. Otherwise, the track will be damaged in the process of use, and the simple maintenance method will not work.

Here are some tips for repairing doors. First, we need to prepare the following tools and materials: 1. Hammer 2. Screwdriver 3. Steel pipe 4. Broom 5. Vacuum cleaner 6. Lubricating oil
1： Clean the track of the sliding door
Because the time is too long, there will be a lot of dust and slag in the track. At this time, we need to use a broom to clean up the dust in the track.
2： Oil the track
If the door can still be used, we still need to add lubricating oil. Then the sliding door is opened and closed several times, so that we can slide more easily.
3： If the track is not straight, it needs to be repaired
During use, a heavy object may press over the track, causing the track to deform and bend. At this time, we need to repair it. First, we need to find a piece of wood that is almost as wide as the track, and then put the wood in the track (we must pay attention to the wood being wider than the track).
Only in this way can the curved track be repaired, and then the wood clamped between the tracks be hammered with a hammer, so that the curved track can be repaired.
4： Pulley adjustment
If the pulley is used for too long, it will be uneven or worn. At this time, we need to use a screwdriver to remove all the doors, and then use a screwdriver to adjust the height of the pulley. If it is really impossible, we can find some small cushion blocks to cushion the pulley. If we still can't see the decoration knowledge, we can make them on the same plane.