What Should I Do If The Sliding Door Track Is Broken?

Pulley track is the most important hardware component in sliding door, which is very important. Therefore, when choosing sliding door, we must choose high-quality pulley track. However, what problems should we pay attention to when choosing sliding door pulley track? Today, Xiaobian brought the relevant content of the purchasing skills of sliding door track pulley. Let's learn about it.
Purchasing skills of sliding door track pulley
1、 The pulley should be tightly fitted and smoothly pulled. The pulley is an important part that affects the service life of the sliding door. The gap of the pulley is large, and the dust is easy to enter and block the steel ball, which cannot guarantee its safety and service life.
2、 Look at the material of the pulley and the tightness of the wheel seat
The wheel seat of the pulley shall be made of pressure-resistant and weight-resistant materials, such as 304 stainless steel and high-end synthetic materials. The seal of the wheel seat is good, the water vapor is not easy to enter the wheel, and the smoothness of the wheel is guaranteed.
3、 See the compatibility of pulley and aluminum track
The pulley and track should be closely matched with small gap, which is not easy to fall off when impacted by external forces, so as to avoid safety accidents.
4、 The perfect match between the wheel and the track adopts the imported stainless steel fully enclosed bearing structure at all costs. After 100000 continuous and destructive push-pull tests, there is no damage or abnormality, and the normal service life is up to 10 years.
Problems needing attention in the use of pulleys and sliders:
a: Avoid hitting the movable door with force below, so as not to cause the movable door to fall off.
b: Pay attention to regularly clean the slide rail, pulley and sliding block, and add lubricant (lubricating oil or wax).
c: Adjust the adjusting screws of the sliding block regularly to ensure the effective bearing and good sliding of the sliding block on the movable door.
The above is the relevant introduction of the purchasing skills of the sliding door track pulley. Although the sliding door is now a relatively fashionable category, we can't just pay attention to its appearance and material. The quality of the sliding door pulley track cannot be ignored, because it directly affects the service life of the sliding door.

Learn these common sliding door tips and you can repair it yourself
Whether it is home decoration or shop decoration,

many people choose sliding doors, because the sliding door switch is convenient to save space, and the styles and materials are various,

but the most prone to sliding doors is the track, the problem of the track will directly affect the use,

the sliding door What should I do if the track is broken, then today I will introduce you to the maintenance tips of sliding doors,

and I have learned that I can repair it myself without spending money.

If the sliding door track is broken,

the first thing to do is to check the reason why the track cannot be pushed or pulled.

Do not blindly replace the track. If the sliding door does not move,

it does not mean that the sliding door track must be broken, or it may be the sliding door.

The pulley is damaged. If the track is not squeezed and deformed,

it may not be the track.

Check whether the pulley is damaged.

If the pulley is damaged, replace the pulley.

If the inspection is completed and it is judged that the sliding door track is deformed,

then the only way to replace the new track is to replace the sliding door track:

First take a frame and lower seal, and fix them with screws;

 Put the fixed frame on the ground,

and then push and pull the sliding door.

The door panel of the door is placed on the ground in an orderly manner;

Take another frame and snap it into the arranged sliding door panel,

and fix the lower seal and frame with screws;

 Insert the upper seal, fix it with screws,

and fix the upper seal at the same time Slide;

 After the upper and lower screws are fixed,

use the traction screw to fix the slide in the lower seal and replace it.

In short, there are many reasons for the failure of the sliding door track.

It is necessary to check first to determine whether it is a problem with the track.

Generally speaking, the probability of a problem with the sliding track is generally higher.

You can first try to put lubricating oil on the position of the pulley,

and then push and pull the sliding door.

Pull the door back and forth several times to see if it can be pushed and pulled smoothly.

If it is pushed and pulled smoothly, it means that the track is no problem.