Sliding doors, also known as sliding glass doors. In addition to closet, closet, to provide a sealed dustproof function, but also in the kitchen, balcony, bathroom, etc., to play a good space separation and increase the role of privacy. Sliding door in the use and installation process there will always be some problems, I summarized several common problems and solutions. As follows.

1. sliding door feel heavy, difficult to move, how to deal with?

1, hanging rail and hanging wheel mismatch, can choose matching products.

2, hanging rail installation deformation, replacement of hanging rail.

3, hanging rail is not level, re-adjust the level of the hanging rail.

4, the door under the edge with the ground touch, or locator and door is not in a vertical line, adjust the door height or move the locator position;.

5, hanging wheel bearing poor or no bearing at all, or the outer cladding is too soft, replace the hanging wheel.

6, the door left and right have high and low, adjust the door left and right height.

2. How to measure the size of the glass sliding door?

When measuring the size of the glass sliding door, the main thing is to measure the height and width accurately.

Measure the height of the size, first the sliding door part height, and then add the depth of the glass door above the mouth, and then subtract 0.1 cm, which is the exact size of the height of the glass sliding door.

For example: the height of the sliding door part is 45 cm, the depth of the upper glass groove is 0.8 cm, then the height of the glass sliding door should be 45.7 cm.

Measure the width of the size, as long as the sliding door part of the opening (width) is accurate, and then the size is divided into two, each side and then add about 3 cm, that is, the width of the glass sliding door size.

Such as: sliding door parts open for 100 cm, then the width of the two glass sliding door is 53 cm each.

To sum up: the formula is: height = sliding door part high + glass on the slot depth - 0.1 cm; width = sliding door part width / 2 + 3 cm.

3. How many times can the pulley sliding door generally push and pull?

Sliding doors generally require more than 60,000 times to push and pull, the brand can reach more than 100,000 times. The material of the pulley is also important, there are mainly plastic pulleys, metal pulleys and fiberglass pulleys 3 kinds. Plastic pulley texture hard, but the use of a long time will be astringent, hardened, can not slide; metal pulley strength is great, but in contact with the track will generate noise; fiberglass toughness, good wear resistance, smooth sliding. In addition, good pulleys are often designed with two anti-jump device to ensure that the sliding door glides safely without derailment. This cautions users in the purchase of sliding doors must be carefully selected.

4. Several methods of installing doors in kitchens and bathrooms.

Many kitchens and bathrooms of the original doorway is generally smaller, such as want to install sliding doors there are two methods:.

1. the original door hole to expand a little, leaving two doors of space, so more flexible, the bathroom can add locks.

2. Install a single track sliding door, you can do a clip wall, pull open can be hidden, or installed on the outside of the doorway, if the side of the best to do a curtain box style box above the doorway, both beautiful and safe.

5. How to clean the sliding door?

1, regularly clean the surface of the sliding door with a soft cloth with water or neutral detergent, do not use ordinary soap and laundry detergent, not to use decontamination powder, toilet detergent and other strong acid and alkali cleaners.

2, do not allow the use of sandpaper, wire brushes or other abrasives for cleaning, in the cleaning process to be washed with clean water, especially the cracks, dirt, but also with a soft cloth with alcohol to scrub.

3, if the sliding door body material using sheet material, the wet rag used in cleaning should not be too much moisture, as long as you keep moist.