How To Keep Automatic Doors Running Well

Automatic doors Switchable Smart Glass Door have been widely used in major supermarkets, office buildings, hotels, hospitals and other public places, but users only stay in the use of automatic doors and do not know that automatic sliding doors need maintenance.

Routine and simple maintenance of automatic doors can help prolong the life of automatic glass doors. The daily maintenance of automatic doors can prevent automatic doors from malfunctioning in use, prevent accidents, maintain good operating functions, and ensure safe operation.

 The automatic door needs to be kept dry, the surface of the motor should be clean, and the suction port should not enter dust and fiber obstacles, that is, keep the operating environment of the automatic door clean.

 If the continuous thermal protection of the motor of the automatic door stops, it should be checked whether the fault comes from the motor or the trigger protection device caused by overload operation. After the fault is eliminated, it can be put into operation.

The edges and corners of the integrated automatic door should be properly protected, otherwise frequent friction will cause the surface of the edges and corners to fall off.

The motor is the same as the car engine. After a long period of operation, there needs to be a maintenance stage. When the motor runs for 5,000 hours, the motor needs to be supplemented or replaced with grease. During operation, the bearing overheats or the lubrication deteriorates. The grease needs to be replaced in time.

The noise of the Automatic Opening Telecopis Sliding Glass Door increases significantly during operation, which may be the limit of the service life of the automatic door bearing, and the noise can be eliminated by simply replacing the bearing. When the radial clearance of the bearing reaches the following value, the bearing should be replaced.