What Are The Preparations For The Installation Of Electric Doors?

In the construction of modern enterprises and the construction of communities, more and more people like to install electric doors. The installation and use of electric doors can make the image of the enterprise and the community better, and the functions of installing automatic sliding doors are relatively complete.

It is more convenient in use and has the effect of anti-theft. Therefore, the use of electric doors can make people's use better, but the premise is that everything goes smoothly when installing electric doors, then the installation of electric sliding doors needs to be prepared before installation. What are the things that need to be prepared when installing electric doors.

The first thing to prepare is to measure the length of the electric glass door that needs to be installed at the door. The size is an important factor in the installation. We need to measure the size without any error, so that it can be more suitable.

The size measurement of the electric door is installed. After completion, you can choose and install the electric door. Since there are many companies that install electric doors, we can shop around and choose the most suitable one.

When installing an electric door, you can choose several high-end brands to choose. Such products are more durable and good to use, and the functions of installing an electric door are relatively complete.

We can use the function, price, and service time of the automatic closing door​ and other factors to choose the cooperative manufacturers of electric doors. After installing the electric door, you need to understand the relevant maintenance methods.

The installation of the electric door needs to develop a good maintenance cycle in the application, so as to keep the installation of the electric door smoother and better in the later application, and can reduce the failure. incidence rate.

After installing the electric door, you need to check it several times to see if it is shaking back and forth and whether the installation is unstable. Then test it with the remote control and listen to whether there is any noise when opening and closing the electric door, so as to ensure that Install the automatic pocket door with remote to use the effect.

What should we pay attention to when installing the electric sliding door
a. Ensure that the door body can slide smoothly on the track, otherwise it will lead to the failure of opening or closing the door.
b. The door cannot be installed on the slope, and a certain safety distance must be maintained between the door body and other objects.
c. Ensure that the motor is installed on a firm foundation.
d. It is only allowed to be used under the condition of sound technology and with safety awareness and danger awareness as specified in the product manual.
e. The sliding door motor cannot compensate for the defects of the door body itself or the wrong installation of the door body.
f. The door body must be stable and resistant to distortion, that is, it is not allowed to swing, bend or deform when opening or closing.
g. The limit device of the sliding door motor must be installed at the maximum opening position and closing position of the door, otherwise the door body may be separated from the track in the emergency unlocking state.
h. In order to prevent the influence of freezing in winter, the running track must be installed in a place with good drainage.
i. Cable sleeves must be installed. If the opening / closing door is controlled by the button, the minimum height of the button should be 1.6 meters from the ground to prevent children from misoperation.
j. Before using the sliding door motor, be sure to release any locking devices (such as electronic locks, door latches, etc.) on the door body.