Between Home And Nature, There Is Only A Folding Door

A folding door maximizes the connection between the indoor space and the outdoors, and introduces the sunlight and breath of nature into the interior. The two are integrated, and you can taste the real life in leisure. Compared with sliding doors, folding doors are also capable of sound insulation, heat insulation, dust and wind protection, more security against theft, and larger opening space. Fuxuan whole house doors and windows have carefully researched and introduced a variety of folding doors according to the user's behavior habits and preferences. "Folding" a new style of life.

1. Safety
Using HDSAFE high-quality brand hardware system, safe and durable;One-piece handle design.Anti-pinch hand design, fingers will not be pinched when they reach into the door seam.Profile multi-cavity structure, resistant to strong storm and strong impact.

2. Flexible

Flexible control of the ever-changing space. The folding door is used as a wall and connected at 90°, which can not only close the balcony, but also form a small room indoors.HDSAFE can realize personalized customization according to the needs of users. The unique design is matched with personalized aesthetic interest to bring a different life experience. Choose doors of different colors and textures according to the interior tone, keep the style highly uniform, and enjoy the beauty of the ultimate spatial fluidity.

Installation of folding door
1. Before installing the folding door, we should determine the location of decoration and installation. If it is used as a kitchen door or toilet door, it should be installed
In the middle of the door frame; If it is used as the partition of the living room, it is necessary to determine the position, leave the corresponding space, and measure the length of the straight line. Then confirm whether the length of the track is correct. If the track is relatively long, measure the length with a ruler, make a mark, and cut off the long part with a hacksaw.
2. Pick up the slide, insert the folding door into the slide in the bundled state, and push it to the middle of the slide. The strapping state is more convenient for installation. It is pushed to the middle to prevent inadvertent sliding and falling from the slide during installation.
3. Before fixing, you should confirm the direction of the handle, whether it is used to pulling left or right, and choose the corresponding direction according to your habits. After confirmation, start to install the track, install it in the order of the middle first and then both sides, and screw the screws into the track and the door frame or wall with an impact drill.
4. Pull the folding door open, and determine the position of installing the iron absorption plate on the wall or door frame by comparing the position of the iron absorption stone on the door. After determining the position of each iron suction plate, drill holes with an impact drill, about four centimeters deep, then drive the rubber sleeve into the hole, and then drive the rubber sleeve in turn.
5. Pull the folding door open, and determine the position of installing the iron absorption plate on the wall or door frame by comparing the position of the iron absorption stone on the door. After determining the position of each iron suction plate, drill holes with an impact drill, about four centimeters deep, then drive the rubber sleeve into the holes, and then successively